More renaming

README.md

@@ -21,7 +21,7 @@ which stores how far through the `state_groups` table the compressor has scanned
 The tool can be run manually when you are running out of space, or be scheduled to run
 periodically.
 
-## Building 
+## Building
 
 This tool requires `cargo` to be installed. See https://www.rust-lang.org/tools/install
 for instructions on how to do this.
@@ -30,7 +30,7 @@ To build `synapse_auto_compressor`, clone this repository and navigate to the
 `synapse_auto_compressor/` subdirectory. Then execute `cargo build`.
 
 This will create an executable and store it in
-`synapse_auto_compressor/target/debug/auto_compressor`.
+`synapse_auto_compressor/target/debug/synapse_auto_compressor`.
 
 ## Example usage
 ```
@@ -38,25 +38,25 @@ $ synapse_auto_compressor -p postgresql://user:pass@localhost/synapse -c 500 -n
 ```
 ## Running Options
 
-- -p [POSTGRES_LOCATION] **Required**  
+- -p [POSTGRES_LOCATION] **Required**
 The configuration for connecting to the Postgres database. This should be of the form
 `"postgresql://username:password@mydomain.com/database"` or a key-value pair
 string: `"user=username password=password dbname=database host=mydomain.com"`
 See https://docs.rs/tokio-postgres/0.7.2/tokio_postgres/config/struct.Config.html
 for the full details.
 
-- -c [CHUNK_SIZE] **Required**  
+- -c [CHUNK_SIZE] **Required**
 The number of state groups to work on at once. All of the entries from state_groups_state are
 requested from the database for state groups that are worked on. Therefore small chunk
 sizes may be needed on machines with low memory. Note: if the compressor fails to find
 space savings on the chunk as a whole (which may well happen in rooms with lots of backfill
 in) then the entire chunk is skipped.
 
-- -n [CHUNKS_TO_COMPRESS] **Required**  
+- -n [CHUNKS_TO_COMPRESS] **Required**
 *CHUNKS_TO_COMPRESS* chunks of size *CHUNK_SIZE* will be compressed. The higher this
 number is set to, the longer the compressor will run for.
 
-- -d [LEVELS]  
+- -d [LEVELS]
 Sizes of each new level in the compression algorithm, as a comma-separated list.
 The first entry in the list is for the lowest, most granular level, with each
 subsequent entry being for the next highest level. The number of entries in the
@@ -68,14 +68,14 @@ given set of state. [defaults to "100,50,25"]
 ## Scheduling the compressor
 The automatic tool may put some strain on the database, so it might be best to schedule
 it to run at a quiet time for the server. This could be done by creating an executable
-script and scheduling it with something like 
+script and scheduling it with something like
 [cron](https://www.man7.org/linux/man-pages/man1/crontab.1.html).
 
 # Manual tool: synapse_compress_state
 
 ## Introduction
 
-A manual tool that reads in the rows from `state_groups_state` and `state_group_edges` 
+A manual tool that reads in the rows from `state_groups_state` and `state_group_edges`
 tables for a specified room and calculates the changes that could be made that
 (hopefully) will significantly reduce the number of rows.
 
@@ -86,7 +86,7 @@ that if `-t` is given then each change to a particular state group is wrapped
 in a transaction). If you do wish to send the changes to the database automatically
 then the `-c` flag can be set.
 
-The SQL generated is safe to apply against the database with Synapse running. 
+The SQL generated is safe to apply against the database with Synapse running.
 This is because the `state_groups` and `state_groups_state` tables are append-only:
 once written to the database, they are never modified. There is therefore no danger
 of a modification racing against a running Synapse. Further, this script makes its
@@ -96,7 +96,7 @@ from any of the queries that Synapse performs.
 The tool will also ensure that the generated state deltas do give the same state
 as the existing state deltas before generating any SQL.
 
-## Building 
+## Building
 
 This tool requires `cargo` to be installed. See https://www.rust-lang.org/tools/install
 for instructions on how to do this.
@@ -126,54 +126,54 @@ $ psql synapse < out.data
 
 ## Running Options
 
-- -p [POSTGRES_LOCATION] **Required**  
+- -p [POSTGRES_LOCATION] **Required**
 The configuration for connecting to the Postgres database. This should be of the form
 `"postgresql://username:password@mydomain.com/database"` or a key-value pair
 string: `"user=username password=password dbname=database host=mydomain.com"`
 See https://docs.rs/tokio-postgres/0.7.2/tokio_postgres/config/struct.Config.html
 for the full details.
 
-- -r [ROOM_ID] **Required**  
+- -r [ROOM_ID] **Required**
 The room to process (this is the value found in the `rooms` table of the database
 not the common name for the room - it should look like: "!wOlkWNmgkAZFxbTaqj:matrix.org".
 
-- -b [MIN_STATE_GROUP]  
+- -b [MIN_STATE_GROUP]
 The state group to start processing from (non-inclusive).
 
-- -n [GROUPS_TO_COMPRESS]  
+- -n [GROUPS_TO_COMPRESS]
 How many groups to load into memory to compress (starting
 from the 1st group in the room or the group specified by -b).
 
-- -l [LEVELS]  
+- -l [LEVELS]
 Sizes of each new level in the compression algorithm, as a comma-separated list.
-The first entry in the list is for the lowest, most granular level, with each 
+The first entry in the list is for the lowest, most granular level, with each
 subsequent entry being for the next highest level. The number of entries in the
 list determines the number of levels that will be used. The sum of the sizes of
 the levels affects the performance of fetching the state from the database, as the
 sum of the sizes is the upper bound on the number of iterations needed to fetch a
 given set of state. [defaults to "100,50,25"]
 
-- -m [COUNT]  
+- -m [COUNT]
 If the compressor cannot save this many rows from the database then it will stop early.
 
-- -s [MAX_STATE_GROUP]  
+- -s [MAX_STATE_GROUP]
 If a max_state_group is specified then only state groups with id's lower than this
 number can be compressed.
 
-- -o [FILE]  
+- -o [FILE]
 File to output the SQL transactions to (for later running on the database).
 
-- -t  
+- -t
 If this flag is set then each change to a particular state group is wrapped in a
 transaction. This should be done if you wish to apply the changes while synapse is
 still running.
 
-- -c  
+- -c
 If this flag is set then the changes the compressor makes will be committed to the
 database. This should be safe to use while synapse is running as it wraps the changes
 to every state group in it's own transaction (as if the transaction flag was set).
 
-- -g  
+- -g
 If this flag is set then output the node and edge information for the state_group
 directed graph built up from the predecessor state_group links. These can be looked
 at in something like Gephi (https://gephi.org).
@@ -197,7 +197,7 @@ $ docker-compose down
 # Using the synapse_compress_state library
 
 If you want to use the compressor in another project, it is recomended that you
-use jemalloc `https://github.com/gnzlbg/jemallocator`. 
+use jemalloc `https://github.com/gnzlbg/jemallocator`.
 
 To prevent the progress bars from being shown, use the `no-progress-bars` feature.
 (See `synapse_auto_compressor/Cargo.toml` for an example)
@@ -217,14 +217,14 @@ from the machine where Postgres is running, the url will be the following:
 ### From remote machine
 
 If you wish to connect from a different machine, you'll need to edit your Postgres settings to allow
-remote connections. This requires updating the 
+remote connections. This requires updating the
 [`pg_hba.conf`](https://www.postgresql.org/docs/current/auth-pg-hba-conf.html) and the `listen_addresses`
 setting in [`postgresql.conf`](https://www.postgresql.org/docs/current/runtime-config-connection.html)
 
 ## Printing debugging logs
 
-The amount of output the tools produce can be altered by setting the RUST_LOG 
-environment variable to something. 
+The amount of output the tools produce can be altered by setting the RUST_LOG
+environment variable to something.
 
 To get more logs when running the synapse_auto_compressor tool try the following:
 
@@ -232,14 +232,14 @@ To get more logs when running the synapse_auto_compressor tool try the following
 $ RUST_LOG=debug synapse_auto_compressor -p postgresql://user:pass@localhost/synapse -c 50 -n 100
 ```
 
-If you want to suppress all the debugging info you are getting from the 
+If you want to suppress all the debugging info you are getting from the
 Postgres client then try:
 
 ```
 RUST_LOG=synapse_auto_compressor=debug,synapse_compress_state=debug synapse_auto_compressor [etc.]
 ```
 
-This will only print the debugging information from those two packages. For more info see 
+This will only print the debugging information from those two packages. For more info see
 https://docs.rs/env_logger/0.9.0/env_logger/.
 
 ## Building difficulties
@@ -249,7 +249,7 @@ and building on Linux will also require `pkg-config`
 
 This can be done on Ubuntu  with: `$ apt-get install libssl-dev pkg-config`
 
-Note that building requires quite a lot of memory and out-of-memory errors might not be 
+Note that building requires quite a lot of memory and out-of-memory errors might not be
 obvious. It's recomended you only build these tools on machines with at least 2GB of RAM.
 
 ## Auto Compressor skips chunks when running on already compressed room
@@ -267,7 +267,7 @@ be a large problem.
 ## Compressor is trying to increase the number of rows
 
 Backfilling can lead to issues with compression. The synapse_auto_compressor will
-skip chunks it can't reduce the size of and so this should help jump over the backfilled 
+skip chunks it can't reduce the size of and so this should help jump over the backfilled
 state_groups. Lots of state resolution might also impact the ability to use the compressor.
 
 To examine the state_group hierarchy run the manual tool on a room with the `-g` option

compressor_integration_tests/src/lib.rs

@@ -179,7 +179,7 @@ fn collapse_state_with_database(state_group: i64) -> StateMap<Atom> {
     // the predecessor (so have split this into a different query)
     let query_pred = r#"
         SELECT prev_state_group
-        FROM state_group_edges 
+        FROM state_group_edges
         WHERE state_group = $1
     "#;
 
@@ -243,7 +243,7 @@ pub fn database_structure_matches_map(state_group_map: &BTreeMap<i64, StateGroup
     // the predecessor (so have split this into a different query)
     let query_pred = r#"
         SELECT prev_state_group
-        FROM state_group_edges 
+        FROM state_group_edges
         WHERE state_group = $1
     "#;
 
@@ -356,7 +356,7 @@ fn functions_are_self_consistent() {
 }
 
 pub fn setup_logger() {
-    // setup the logger for the auto_compressor
+    // setup the logger for the synapse_auto_compressor
     // The default can be overwritten with RUST_LOG
     // see the README for more information
     if env::var("RUST_LOG").is_err() {
@@ -366,7 +366,7 @@ pub fn setup_logger() {
         // default to printing the debug information for both packages being tested
         // (Note that just setting the global level to debug will log every sql transaction)
         log_builder.filter_module("synapse_compress_state", LevelFilter::Debug);
-        log_builder.filter_module("auto_compressor", LevelFilter::Debug);
+        log_builder.filter_module("synapse_auto_compressor", LevelFilter::Debug);
         // use try_init() incase the logger has been setup by some previous test
         let _ = log_builder.try_init();
     } else {

synapse_auto_compressor/src/lib.rs

@@ -61,11 +61,12 @@ fn synapse_auto_compressor(_py: Python, m: &PyModule) -> PyResult<()> {
     let _ = pyo3_log::Logger::default()
         // don't send out anything lower than a warning from other crates
         .filter(LevelFilter::Warn)
-        // don't log warnings from synapse_compress_state, the auto_compressor handles these
-        // situations and provides better log messages
+        // don't log warnings from synapse_compress_state, the
+        // synapse_auto_compressor handles these situations and provides better
+        // log messages
         .filter_target("synapse_compress_state".to_owned(), LevelFilter::Error)
-        // log info and above for the auto_compressor
-        .filter_target("auto_compressor".to_owned(), LevelFilter::Debug)
+        // log info and above for the synapse_auto_compressor
+        .filter_target("synapse_auto_compressor".to_owned(), LevelFilter::Debug)
         .install();
     // ensure any panics produce error messages in the log
     log_panics::init();
@@ -92,7 +93,7 @@ fn synapse_auto_compressor(_py: Python, m: &PyModule) -> PyResult<()> {
         number_of_chunks: i64,
     ) -> PyResult<()> {
         // Announce the start of the program to the logs
-        log::info!("auto_compressor started");
+        log::info!("synapse_auto_compressor started");
 
         // Parse the default_level string into a LevelInfo struct
         let default_levels: LevelInfo = match default_levels.parse() {
@@ -120,7 +121,7 @@ fn synapse_auto_compressor(_py: Python, m: &PyModule) -> PyResult<()> {
             return Err(PyErr::new::<PyRuntimeError, _>(format!("{:?}", e)));
         }
 
-        log::info!("auto_compressor finished");
+        log::info!("synapse_auto_compressor finished");
         Ok(())
     }
     Ok(())

synapse_auto_compressor/src/main.rs

@@ -26,13 +26,13 @@ use synapse_auto_compressor::{manager, state_saving, LevelInfo};
 
 /// Execution starts here
 fn main() {
-    // setup the logger for the auto_compressor
+    // setup the logger for the synapse_auto_compressor
     // The default can be overwritten with RUST_LOG
     // see the README for more information
     let log_file = OpenOptions::new()
         .append(true)
         .create(true)
-        .open("auto_compressor.log")
+        .open("synapse_auto_compressor.log")
         .unwrap_or_else(|e| panic!("Error occured while opening the log file: {}", e));
 
     if env::var("RUST_LOG").is_err() {
@@ -41,8 +41,8 @@ fn main() {
         log_builder.filter_module("panic", LevelFilter::Error);
         // Only output errors from the synapse_compress state library
         log_builder.filter_module("synapse_compress_state", LevelFilter::Error);
-        // Output log levels info and above from auto_compressor
-        log_builder.filter_module("auto_compressor", LevelFilter::Info);
+        // Output log levels info and above from synapse_auto_compressor
+        log_builder.filter_module("synapse_auto_compressor", LevelFilter::Info);
         log_builder.init();
     } else {
         // If RUST_LOG was set then use that
@@ -54,7 +54,7 @@ fn main() {
     }
     log_panics::init();
     // Announce the start of the program to the logs
-    log::info!("auto_compressor started");
+    log::info!("synapse_auto_compressor started");
 
     // parse the command line arguments using the clap crate
     let arguments = App::new(crate_name!())
@@ -113,7 +113,7 @@ fn main() {
             Arg::with_name("number_of_chunks")
                 .short("n")
                 .value_name("CHUNKS_TO_COMPRESS")
-                .help("The number of chunks to compress") 
+                .help("The number of chunks to compress")
                 .long_help(concat!(
                     "This many chunks of the database will be compressed. The higher this number is set to, ",
                     "the longer the compressor will run for."
@@ -155,5 +155,5 @@ fn main() {
     manager::compress_chunks_of_database(db_url, chunk_size, &default_levels.0, number_of_chunks)
         .unwrap();
 
-    log::info!("auto_compressor finished");
+    log::info!("synapse_auto_compressor finished");
 }